Description:

MPure is a filtering polymer with high removal of soluble and insoluble organic impurities and colloidal structure of water. Its large surface area structure with micropores ensures superior removal of nitrogenous organics, providing pure and transparent water for freshwater and saltwater aquariums.

It guarantees a superior removal of organics from the water compared to other mineral removers, controlling the ammonia, nitrites and nitrates in the water.

MPure Polymers have the ability to regenerate, their color changes from light beige to a dark brown when saturated by organics. Its regeneration is simple. MPure is an efficient solution to pure, clean water for your aquarium.

Instructions:

Use a fine mesh pouch to pack MPure. Keep it in a place with better movement of water in the aquarium or inside the filter. Every 100 ml treats up to 400 liters. The usage period depends on the organic load that the aquarium produces. To find out the period, check the change of color of the polymers, when the color changes from beige to dark brown, regeneration should be done.

Size of spheres: 0.3 to 1.2 mm

Packaging:

100ml

200 ml

Regeneration:

Prepare a 50/50 solution of bleach and water, soak in this solution for 24 hours, then rinse well with water and soak in only water with chlorine remover for another 15 minutes. After this procedure, rinse again and you will be able to reuse the product. When in doubt, use a chlorine test to verify that it is completely free of chlorine.

New Mpure Regeneration:

Prepare a solution with 3% to 4% of hydrochloric acid (aquarium acidifier) and leave the MPure in immersion for at least 30 minutes. After verifying that the liquid in the solution has been tinted, the new MPure must be washed with plenty of water, then it will be ready to use again.

No expiry date if kept closed.